آذین تک سپاهان

طراح و مجری فیبرنوری (FTTH)
پیمانکار مورد تایید
شرکت مخابرات اصفهان

جهت ثبت سفارش و مشاوره رایگان با ما تماس بگیرید

اسماعیلی 9133088797 - 09133175596

آدرس شرکت : اصفهان ، خیابان شیخ صدوق شمالی ، انتهای کوچه شهید جواد احمدی ( کوچه 38 )

اسماعیلی 9133088797 - 09133175596

فیوژن فوجی کورا 62S

Fujikura 62S Fusion Splicer The Fujikura 62S provides active core alignment splice loss performance while utilizing a conventional wind protector and tube heater design. An alternative to the fully automated core-alignment model 70S, the 62S includes an auto-start feature for both the splicing and tube heating process that minimizes the steps necessary to process splices. With a shrink time of 23 seconds with standard splice sleeves, the 62S ensures a high level of productivity. Incorporating the proven ruggedized features pioneered by Fujikura, durability is greatly enhanced by a mirrorless optical system and "severeimpact resistant" monitor. Battery capacity is 200 splices/shrinks. The transit case doubles as a built-in or mobile workstation and makes splicing easier than ever.

کاتر/کلیور Fibre Cleaver – CT-30A

این دستگاه طراحی شده برای قابلیت حمل عالی ، CT-30A به طور مساوی در خانه در یک ون برقی یا کامیون سطل قرار دارد و برای کاربردهای FTTx ایده آل است. تیغه 16 موقعیتی 48،000 برش تک فیبر یا 4000 روبان 12 فیبر را قبل از نیاز به تعویض باز می کند ، و جمع کننده ضایعات داخلی ساخته شده به راحتی محافظ فیبر را نگه می دارد تا بتوان با اطمینان از بین برد. CT-30A Cleaver با سه گزینه جمع آوری ضایعات بسته بندی شده است که به کاربر امکان می دهد متناسب با ترجیحات آنها CT30A با کاور جانبی SC-01 تحویل داده شده است برای کاربرانی که ترجیح می دهند از سیستم خودکار جمع آوری قراضه استفاده نکنند ، نصب شده است. برای آنهایی که سیستم جمع آوری قراضه را ترجیح می دهند ، جمع کننده فیبر FC-02 و دو گزینه جعبه قراضه گنجانده شده است. جعبه ضایعات FDB-02 سطل کوچکتری برای کاربرانی است که به دنبال یک نمایه جمع و جور هستند. جعبه ضایعات FDB-03 یک سطل بزرگتر با برس جارو و سطوح مقاوم در برابر استاتیک برای کاربرانی است که به دنبال به حداکثر رساندن ظرفیت ضایعات هستند. همه گزینه های قراضه به راحتی توسط کاربر پیکربندی می شوند.

کاتر / کلیور CT-06 Cleaver

Designed for single fibres, this high precision cleaver is ideal for FTTH fusion splicing, field installable connector and mechanical splice applications. The long-life, 16-position circular blade performs cleaving operation in one single step. A fibre collector for scrap fibre can easily be detached.

کاتر فیبر نوری|کلیور

Active Clad Alignment Fusion Splicer S153A Ver2

* Active V-groove is more reliable than conventional Fixed V-groove splicer * Rugged and compact hand-held design to endure any kind of environmental conditions * Internal battery charging * Fast splice (9sec) at super low loss and fast heating(25sec) * 200 cycles (Splicing & heating) with two batteries * Available for All METRO/LAN/FTTx fibers including ultra bend-insensitive fibers(G657) * Applicable for Splice-On-Connector(SOC)

Core Alignment Fusion Splicer S178A Ver2

Core Alignment Fusion Splicer S178A Ver2 * Rugged and compact hand-held design to endure any kind of environmental conditions * Internal battery charging * Fast splice (7sec) at super low loss and fast heating (25sec) * 200cycles (Splicing & heating) with two batteries * Available for All METRO/LAN/FTTx fibers including ultra bend-insensitive fibers (G657) * Applicable for Splice-On-Connector(SOC)

Hand-Held Core Alignment LDF Fusion Splicer S178LDF

The FITEL S178LDF Core Alignment Large Diameter Fiber Fusion Splicer is able to splice fibers of up to 450μm in cladding diameter. Its robust, compact and hand-held design allows the operator to use it at any location. The fast splicing and heating, as well as simple operation, maximize the working efficiency. Feature * Available for Large Diameter Fiber of up to 450µm in cladding diameter * Rugged and compact design * Available for hand-held operation * Fast splicing & heating * Available for operation by internal battery

فیوژن فوجی کورا S70

The 70S is the latest addition to Fujikura's fusion splicer range and has been specifically designed to be more ergonomic, faster and have greater durability than the 60S, reducing splicing time to just seven seconds. The rugged construction design adds improved reliability by resisting shock, rain and dust, allowing it to withstand a 30 inch drop test. Two of the newest features include an automated wind protector and a tube heater which has been developed for quicker splicing cycles and to reduce the number of operational steps. The unit also includes a high-

Swift F3 - FTTH Smallest Fusion Splicer

Features Applicable for SOC(splicer on connector) Smallest, Lightest, Fastest Resistant to Shock, Dust, Rain Efficient Two Heater System

Swift S3 - Core Alignment Fusion Splicer

Features Core Alignment by IPAS Technology Resistant Shock, Dust andRain Powerful Battery with Large Capacity Dual Sleeve Heater Automatic Execution of Discharge Calibration Compatible for SOC Connector(Option) Smallest, Lightest & Fastest 4.3 Color LCD Monitor with Touch Panel Bidirectional Operation System Attached Sleeve Loader Attached Night Light

Ribbon Fusion Splicers S123M4-A

* Rugged and compact hand-held design to endure any kind of environmental conditions * Internal battery charging * Fast splice(15sec) at low loss and fast heating(36sec) * 70 cycles(Splicing & heating) for S123M4 and 160 cycles for S123M8/S123M12 with two batteries * Available for All METRO/LAN/FTTx fibers including ultra bend-insensitive fibers(G657)

Fixed V-groove Fusion Splicer S123C Ver2

* Rugged and compact hand-held design to endure any kind of environmental conditions * Internal battery charging * Fast splice (13sec) at low loss and fast heating (25sec) * 70 cycles (Splicing & heating) * Available for All METRO/LAN/FTTx fibers including ultra bend-insensitive fibers(G657) * Applicable for Splice-On-Connector(SOC)

Hand-Held Single Fiber Fusion Splicer FITEL NINJA NJ001-2

The FITELNINJA NJ001 Hand-Held Single Fiber Fusion Splicer is suitable for all METRO, LAN and FTTx fibers including ultra bend-insensitive fibers. With its low-profile, compact and ruggedized body, the NJ001 offers reliable splicing under harsh environmental conditions. The large battery capacity makes it possible to perform 100 splicing and heating cycles. Combining portability, power, flexibility and field ruggedness, the NJ001 delivers fast and consistent splicing with outstanding mobility and optimal ease of use.

Swift R5 - Ribbon All In One Fusion Splicer

Features Integrated to All In One Rugged Design Against Shock, Dust, Rain Long Battery Life more than 320times Full-Cycles Dual Sleeve Heater No Scratches on Bare Fiber by Heating Stripping Navigational Touch Screen with 4.3 Color Monitor Attached Sleeve Loader Compatible for SOC Connector (Option) The Swift R5’s ergonomic design enables the user to complete all five processes of optical fiber splicing (stripping, cleaning, cleaving, splicing and sleeving) quickly and conveniently. The All In One design eliminates the need for a large work space of a traditional fusion splicer design that uses all of the prep tools (manual stripper, cleaver, alcohol bottle) separately. Also, the automatic thermal stripper conveniently strips 250um and 900um without scratching the fiber that is typical when using hand held mechanical fiber strippers. This, in turn, reduces the chances of failure that may be caused by the scratches introduced when using mechanical strippers.

Swift S5 - Core Alignment All In One Fusion Splicer

Features Integrated to All In One Ruggedized Design Against Dhock, Dust, Rain Long Battery Life more than 320times Full-Cycles Dual Sleeve Heater No Scratches on Bare Fiber by Heating Stripping Navigational Touch Screen with 4.3 Color Monitor Attached Sleeve Loader Compatible for SOC Connector (Option) The Swift S5’s ergonomic design enables the user to complete all five processes of optical fiber splicing (stripping, cleaning, cleaving, splicing and sleeving) quickly and conveniently. The All-In-One design eliminates the need for a large work space of a traditional fusion splicer design that uses all of the prep tools (manual stripper, cleaver, alcohol bottle) separately. Also, the automatic thermal stripper conveniently strips 250um and 900um without scratching the fiber that is typical when using hand held mechanical fiber strippers. This, in turn, reduces the chances of failure that may be caused by the scratches introduced when using mechanical strippers.

Swift F1 - All In One Fusion Splicer

Swift F1 is the highly sophisticated and integrated clad alignment fusion splicer, which has been designed to perform the major 5 multifunctional features systematically: heating , stripping(No scratches on the fiber →No broken fiber in harsh environment), cleaning,cleaving, splicing and sleeving. The Swift F1 has been designed for fusion splicing and splice-on connector (Swift Connector) of FTTH network applications. The structural and complementary features of Swift F1 have been applied to the design of Swift Connectors to resolve the problems of mechanical connectors in past: low quality, weak durability and high maintenance cost. Swift F1 has turned around the way that the connector users, who were used to thinking previously, as from the installation and maintenance costs of splice-on connector, had been more expensive than a mechanical connector to more cost effective than mechanical connector purchasing cost of splice-on connector. Swift F1 is a versatile fusion splicer which can perform all kinds of FTTH fusion splicing for the ordinary 0.25mm, 0.9mm, 2mm~3mm cable, indoor cable and others splicing connectors. Swift F1 is possible to perform such operations - entire FTTx splicing, FTTH connector splicing, ODF (cope with patch code) and other splicing.

فیوژن سومیتومو T-57

فیوژن سومیتومو T-57 -ساخت کشور ژاپن -ضد رطوبت و ضد ضربه -دارای کلیور سومیتومو -سرعت و کیفیت جوش عالی - کیف مستحکم و بهمراه کلیه متعلقات

فیوژن فوجیکورا 70s plus+

دستگاه فیوژن فوجیکورا 70s plus + - -ساخت کشور ژاپن -ضد رطوبت و ضد ضربه -مجهز به بلوتوث -دارای کلیور ct50 -دقت بالا در جوش -دارای کیف ضد ضربه و بهمراه متعلقات

دستگاه فیوژن کارکرده

-برند فوجیکورا مدل 50S -دارای کلیور CT-30 - کم کار کرد -باطری نو و سالم - الکترود تعویض شده و نو میباشد-یکسال ضمانت و گارانتی - برند سومیتومو مدل T39 - دارای کلیور سومیتومو کاملا فلزی-کم کارکرد -باطری سالم - الکترود تازه تعویض شده - یکسال ضمانت و کارانتی