آذین تک سپاهان

طراح و مجری فیبرنوری (FTTH)
پیمانکار مورد تایید
شرکت مخابرات اصفهان

جهت ثبت سفارش و مشاوره رایگان با ما تماس بگیرید

اسماعیلی 9133088797 - 09133175596

آدرس شرکت : اصفهان ، خیابان شیخ صدوق شمالی ، انتهای کوچه شهید جواد احمدی ( کوچه 38 )

اسماعیلی 9133088797 - 09133175596

کابل بر

چاقو کابل بری

Ergonomic Cable Splicing Knife The tough cutlery steel blade is extremely sharp and cuts easily through many types of insulation. It holds its edge with repeated use and features a non-slip easy grip ergonomic handle made from TPR (thermoplastic rubber) for better control and reduced hand fatigue. Blade length is 1¾" and overall length is 6¼" Part No.:KN-7

Riser Break-out Tool

Mid Span Slitter

Mid Span Slitter Designed to provide easy access to optical fibers in loose buffer tubes 1.5mm to 3.3mm diameter. With precision grooves buffer tube slitting is done without damage to the fiber. Easy to use: Select the correct groove for the cable being slit Place the cable in the proper channel Squeeze and pull Part No.:MS-15

چاقوی کابل

Description straight blade with special sharpening; replaceable with hinged blade guard, integrated in the handle, captive back of the blade plastic coated to avoid short circuits ergonomically shaped insulating handle blade: surgical steel, stainless, vaccum-hardened SN: 98 56

کابل بر

Dismantling Tools for stripping all common round cables self-tightening holding lever with adjusting screw for cutting depth adjustment turnable blade for circular and longitudinal cutting spare blade inside the handle secure grip due to soft component material on handle and holding lever to avoid slipping housing: plastic, impact-proof SN:16 20 165 SB

تیغ برش روکش کابل

PRECISION KNIFE Precision light duty knife features textured handle for secure grip and four-jaw blade grip for safer, more accurate cutting.

کابل بر کوچک

400series kit , with 2.5, 3.0, and 4.4 x 8.2mm head blocks

For mid-span and end slitting of hard fiber buffer tubes and fiber drop cable Interchangeable color coded head blocks matched to buffer tube or drop cable size Standard kit contains tool body and 3 pairs of interchangeable heads all packed in a durable plastic carrying case Block sizes included in standard kit, slit the following cable sizes: 2.3-2.5 mm, 2.7-3.0 mm and 4.4x8.2 mm. For other sizes please contact Customer Service Dual blade design Self closing for safety Latch locks tool closed Comfortable plastic grips Made in the USA Length: 11.39 in (292.00 mm) Height: 2.4765 in (63.50 mm) Width: 8.19 in (210.00 mm)

Mid-Span Access Tool

Quickly and easily access fibers in 2, 2.5 and 3mm buffer tubes in a mid-span location without fiber damage All blades precisely factory mounted in tube slitting channels with no adjustment required by the installer Tool design incorporates buffer tube size gages on the tool body for ease of selecting proper tube slitting channel Convenient spring loaded lever opens and closes the tool and lever becomes flush with the top of the tool body when closed For use with the following diameter buffer tubes: 2.0mm 1.8-2.2 mm (0.071”- 0.086”) 2.5mm 2.3-2.8 mm (0.090”-0.110”) 3.0mm 2.8-3.2 mm (0.110”- 0.126”) Made in the U.S.A Length: 2.48 in (63.50 mm) Weight: 7.93 ounces (226.7g) Part No.:80785

MSAT 5 - Mid-Span Access Tool

Allows easy mid-span access to optical fibers in loose buffer tubes Access tube sizes from 1.9mm to 3.0mm Shaves precise opening to prevent fiber damage Sizing channels to easily determine tube size Locking mechanism ensures tool will remain closed through the entire shaving operation Made in the U.S.A. Length: 3.86 in (99.00 mm) Height: 1.482 in (38.00 mm) Width: 0.702 in (18.00 mm) Weight: 1.35 ounces (38.5g) Part No.: 80930

Tool without insert

Compact and user friendly tool provides quick and easy mid-span access to smaller buffer tubes without fiber damage. Tool design will accommodate a range of interchangeable inserts from 1.3 mm up to and including 1.8 mm (contact customer service for additional sizes). Accesses the fiber by precision "shaving" of the buffer tube wall. Consistent and reliable buffer tube access without any adjustment to tool insert or blade. Double-sided blade for twice the blade life. Locking lever mechanism provides constant pressure to the two body halves ensuring a precise and consistent shaving operation. Tool (without insert) plus your choice of size inserts. Patent Pending Made in the U.S.A. Replacement (includes double sided blade, 1 screw and 1/16 in. hex wrench) Length: 2.85 in (73.00 mm) Height: 1.599 in (41.00 mm) Width: 1.482 in (38.00 mm)

کابل بر فنردار

Compact Bolt Cutters pliers black atramentized, handles plastic coated Exceptional cutting performance with minimum effort because of unsurpassedly effective lever action design

کابل بر کوچک

Features Cuts round communication cables up to 0.5 inch (12.7mm) and coaxial cable up to RG-9/U Curved cutting blades maintain cable geometry for better cable performance Steel reinforced center conductors can be trimmed with bolt cutting holes Cushioned comfort grip handles Locking latch keeps tool closed in pouch

KMS-K Cable Sheath Slitter

KMS-K Cable sheath slitter Tool for safe longutudinal slitting of plastic cable sheaths with different thickness. Applicable either at the beginning or in the middle of the cable. Additional attachable pieces for slitting optic cables and cables with small diameter available. Characteristics of the KMS-K Impact resistant plastic material Safe and simple handling No risk of injuries Adjustable slitting depth Double bladed knife made from hardened special steel Kit contents Cable sheath slitter Attachable piece, grey for cables up to 25 mm ø Attachable piece, yellow for fiber optic cables L.shaped hexagon key Operating instructions Plastic case

قیچی برش کابل آرموردار

Tabbing Shear Tabbing or Cable Sheath Shear for making longitudinal cuts in the cable sheath and the metallic shield. Also known as a cable sheath shear. Designed for making longitudinal cuts in the cable sheath and the metallic shield for placement of inner sheath bond clamps. Made of chrome vanadium steel with a special hardening process for durability, with a precision ground blade for superior cutting. Plastic formed ergonomic handles for safety and comfort and a latch to keep the handles closed when not in use. The volute spring allows for easy opening and closing.

High Leverage Cable Cutters

High leverage design for superior cutting ability Designed with a shear-type jaw for cutting aluminum and soft copper. Not for use on steel or ACSR type cables. Cuts up to 100-pair cables (24 AWG). Red handle 9 1/2" long.

کابل بر

Cable Shears , up to 16mm2 for cutting copper and aluminium cables not suitable for steel wire and hard drawn copper conductors precision ground, hardened blades no crushing, slight deformation of the cable only with guard adjustable bolted joint shears body: surgical steel, stainless, vaccum-hardened handles: plastic, impact-proof Description for copper single conductors up to 16 mm², multiple stranded wires up to 50 mm², fine stranded up to 70 mm² and aluminium conductors multiple stranded wires up to 70 mm² easy cutting with one-hand operation due to high transmission ratio stainless - special grade - steel, oil-hardened and tempered

ACS-2 Armored Cable Slitter

ACS-2 Armored Cable Slitter Professional grade tool ideal for slitting the corrugated copper, steel or aluminum armor layer on fiber feeder, central tue, stranded loose tube fiber optic cables and other armored cables. Versatile design allows jacket or shield slitting on non-fiber optic cables as well. Tool slits outer polyethylene jacket and armor in one operation. Performs longitudinal slitting and circumferential (ringing) for end stripping. Blade rotates 90 degrees by activating blade lever, allowing easy mid-span preparation (ringing and slitting). Adjustable from 0.157 in. (4 mm) to .939 in. (10mm) for smaller cable O.D. options. Adjustable blade depth to 5.5 mm maximum to accommodate different cable jackets. Cable guide wheel provides cable stability and allows for easier tool movement along the cable. Rugged anodized aluminum and steel construction. Made in the U.S.A. Height: 4.953 in (127.00 mm) Weight: 9.94 ounces (284.0g) Part No.:37897

Adjustable Jacket Slitter

Adjustable Jacket Slitter Professional-grade cable slitter designed for longitudinal, circumferential (ringing), and mid-span slitting of corrugated aluminum or copper shield cables, medium-density polyethylene (MDPE), and high-density polyethylene (HDPE) conduits Precision-ground tool steel blade Adjustable blade depth allows slitting of coverings of up to 1/4” (6.3mm) thick Blade fully retracts inside body for storage Cam-adjustable lever allows blade dig-in in mid-span application Lever teeth designed for soft and hard jacket/covering applications Longitudinal slitting of cable/duct ranging from 1/2” (12.7mm) to larger sizes Circumferential slitting of cable/duct ranging from 1-1/2” (38mm) to larger sizes Window cutout to access fibers inside duct ranging from 1-1/2” (38mm) to larger sizes Length: 8.62 in (221.00 mm) Height: 1.989 in (51.00 mm) Width: 1.521 in (39.00 mm) Weight: 11.13 ounces (318.0g) Part No.:43240